Our MTH hex nuts with metric thread, similar to DIN 2510, made of PA66 (Polyamide 66 “Nylon”), offer excellent resistance to chemical products (see technical sheet), a high level of dielectric strength, do not oxidize and prevent damage caused by overvoltage

Drawing PDF:  
UL94:   V2  
IP:   
RoHS:    
Measures expressed in: Millimeters


Reference
Metric Thread
F
H
h
D
Similar DIN
 
 
 
More
Info.
00100101105 M2 3,90 1,30 0,90 3,90 DIN 2510  
00100101106 M2,5 4,90 1,80 1,40 4,10 DIN 2510  
00100101107 M3 5,40 2,40 2,00 5,20 DIN 2510  
00100101108 M3,5 6,90 2,60 2,40 6,30 DIN 2510  
00100101109 M4 6,90 2,90 2,70 6,50 DIN 2510  
00100101110 M5 7,90 4,40 4,20 7,25 DIN 2510  
00100101111 M6 10,00 5,60 5,50 9,20 DIN 2510  
00100101112 M8 12,90 6,40 _ _ DIN 2510  
00100101113 M10 14,70 9,70 _ _ DIN 2510  
00100101207 M12 17,80 10,54 _ _ DIN 2510  

If you are interested in our family MTH, you may be interested in these families as well:

Our metric thread MDIN <b>hex</b> nuts, similar to <b>DIN 34814 (DIN 934/555) / ISO 4032</b>, are manufactured in various <b>engineering materials</b>. that favor properties such as chemical, mechanical, oxidation resistance, etc.<br><br>
They are available in <b>PA66</b> (Polyamide 66 “Nylon”), <b>PP</b> (Polypropylene), <b>POM</b> (Acetal Resin), <b>PVDF</b> b> (Polyvinylidene Fluoride), <b>PEEK</b> (Polyetheretherketone) and <b>PAGF</b> (Polyamide with the possibility of up to 50% fiberglass).<br><br>
<i>The measurements of M2, M2.5 and M3.5 are supplied only in PA66.</i><br>   Our MTCCR metric thread screws with <b>cheese slotted head</b>, similar to <b>DIN 84 / ISO 1207</b>, are manufactured in various <b>engineered materials</b> that favor properties such as chemical, mechanical, oxidation resistance, etc.<br><br>
These cylindrical screws are available in <b>PA66</b> (Polyamide 66 “Nylon”), <b>PP</b> (Polypropylene), <b>POM</b> (Acetal Resin), <b>PVDF</b> (Polyvinylidene Fluoride), <b>PEEK</b> (Polyetheretherketone) and <b>PAGF</b> (Polyamide with the possibility of up to 50% fiberglass).<br><br>
<i>The measurements of M2 and M2.5 are supplied only in PA66.</i><br>   TU washers and spacers are used in a multitude of mechanical and insulation applications, whose manufacturing is carried out in various <b>engineering materials</b> that favor properties such as <i>chemical, mechanical, oxidation resistance, etc. .</i>, and are available in <b>PA</b> -Polyamide 6 and 66 (Nylon)-, <b>PP</b> -Polypropylene-, <b>POM</b> -Resin Acetal-, <b>PVDF</b> -Polyvinylidene Fluoride-, <b>PTFE</b> - Polytetrafluoroethylene (Teflon™)-, <b>PEEK</b> -Polyetheretherketone-, <b>LDPE</b> -Low Density Polyethylene- and <b>PAGF</b> -<i>Nylon with the possibility of up to 50% fiberglass-</i>.
<br>
We also supply upon request some measurements with an adhesive disc on both sides to fix and facilitate assembly during the installation process.
<br>
Contact us for more information and to check the availability of the references of your interest in the materials and colors indicated.   Our MTH <b>hex</b> nuts with metric thread, similar to <b>DIN 2510</b>, made of <b>PA66</b> (Polyamide 66 “Nylon”), offer excellent resistance to chemical products (see technical sheet), a high level of dielectric strength, do not oxidize and prevent damage caused by overvoltage   Our MTHA metric thread <b>flange hex</b>  nuts, similar to <b>DIN 6331</b>, are manufactured in various <b>engineered materials</b> that promote properties such as chemical resistance , mechanical, oxidation, etc.<br><br>
These hexagonal nuts are available in <b>PA66</b> (Polyamide 66 “Nylon”), <b>PP</b> (Polypropylene), <b>POM</b> (Acetal Resin), < b>PVDF</b> (Polyvinylidene Fluoride), <b>PEEK</b> (Polyetheretherketone) and <b>PAGF</b> (Polyamide with the possibility of up to 50% fiberglass).<br>   Our protection cap is suitable for DIN, ISO and ANSI screws and hex nuts. It serves as protection against impact and dirt and at the same time as an embellisher for DIN / ISO screws from M4 to M48 (suitable for DIN screws 933, 931, 961 and 960 and ISO 4017 and 4014). <br>The complete LBK range is offered with the possibility of submitting the pieces to a plastic metallization process that gives them a <b>shiny metallic finish</b>. In the same way, the manufacture in RAL colors can also be requested on demand and minimum order. Consult the conditions to our commercial department.   Our protection cap fits tightly, by means of the special rib around its mouth, assuring protection against corrosion or damage. It can protect with a more tight seal different elements and combinations, like 2 nuts and a bolt.  


lkd  ig  ig


PYME